The Benefits of a Central AC Unit

Central air conditioning systems make use of ductwork to distribute cooled air in every room. An air handler that has a filter that captures particulates regulates airflow.

The unit is usually housed in a small enclosure that is outside the home. The unit’s quiet operation will enhance your comfort, as it will stop the constant hum and whirr of window AC units from disrupting indoor peace.

Energy Efficiency

Although it is true that central air conditioners consume more energy to operate than wall-mounted units however, the reality is that the modern systems are much more efficient than those in the in the past. The ozone-depleting refrigerant R22 was phased out in 2006 and replaced with an environmentally friendly product known as 410A and manufacturers are constantly developing new technologies that help their systems consume less energy.

In contrast to window AC units that are designed to cool just the area they’re installed in, central AC systems can distribute cool air throughout your home with air ducts. The cooling process starts when your thermostat indicates that the air handler should begin to cycle. The air handler pulls warm air from your living space and then it is pushed through the evaporator coil, which is filled with cool refrigerant. The heat in the air causes refrigerant absorb energy, and then transform into a gas. The compressor then increases the temperature and pressure of the refrigerant. When it pumps, the heat is transferred from the evaporator, and then returned to your home, where it will be distributed and cooled through the ductwork.

Central AC systems are most efficient when it comes down to controlling the temperature in large areas. They can cool rooms that are further apart than a single AC unit, and they have better energy efficiency.

Depending on how well your home is insulated and sealed, and the layout of your home, you might find that a mini-split unit can save you even more energy than central air conditioners however. Mini-splits are not the same as central ACs, however they are more efficient since they don’t use the ductwork. Ductwork leaks and can make the system overwork to cool your home to the desired temperature. Contact an HVAC professional from your local Dallas heating company if you want to learn more about energy-efficient solutions for cooling your home. They’ll help you select the right solution for your particular requirements.

Convenience

Central air conditioning systems are not only energy efficient and comfortable, but they also offer a great deal of convenience. They can cool the entire home or business with one unit and don’t require vents like window units. They’re also generally equipped with top-quality air filters that can help keep allergens and pollutants out of the air. This is particularly helpful for those who suffer from respiratory or allergies.

Central AC is one of the most well-known kinds of cooling systems and for good reason. It’s ideal for homes with ductwork and need a powerful cooling solution. These systems are able to supply cool air to every room with just one vent. They can also be used with home zoning, which allows you to regulate your cooling requirements in various areas of your home with an intelligent thermostat.

This is the most commonly used AC system. It works in a similar way similar to a furnace. Central air conditioners are comprised of a large outdoor unit that blows warm air and a smaller inside unit that pulls cold or hot air out of the ductwork. The refrigerant is pumped through the lines from the air handler, and it absorbs heat during the process. The cooled air is pushed back to the air handler in the home, and circulated through the ductwork into other rooms.

A central air conditioning system can also help reduce humidity. This is especially important in our humid climate. The air handler can remove excess moisture and release it to the outside, which helps to prevent the growth of mildew and mold within your ductwork.

It’s time to upgrade your cooling system if it is older than 15 years. A new, high-end AC system can help you save money on energy costs as well as safeguard the integrity of your ductwork. To find out more about Chancey & Reynolds’ cooling solutions, please contact us. We can help you select the best air conditioner for your budget and requirements.

Maintenance

Just like any major appliance the air conditioner also requires regular service to keep running smoothly. Some routine maintenance tasks can be performed by the homeowner, however, other tasks should be left to qualified professionals. Signing an agreement for maintenance is the best way to be on the forefront of AC issues. These agreements typically include discounts on repairs as well as benefits, like priority scheduling.

Clean the Condenser Unit

A condenser unit that is dirty can restrict air flow, reduce system efficiency, and increase energy costs. Before you begin cleaning, shut off the compressor unit to stop dirt and debris from accumulating. Then, using a garden hose and a rag, gently clean the blades and fins of your fan to remove dirt, twigs and leaves. After washing the blades, wipe them using a paper towel and spray to clean. It is also recommended to straighten any bent fins that might be caused by winds, or other weather conditions.

Line Sets

If your central air cooling system has been in operation for more than 10 years, you should employ a professional to examine the line sets. These are the copper tubes that connect the indoor evaporator coil to the outdoor compressor and condenser. The lines carry refrigerant and any cracks or rust may cause leaks that can lead to low cooling and costly utility bills.

Air Filter

To improve the performance of your AC system, you should change your air filter regularly. The frequency of changing your air filter depends on the frequency you run the AC and how many furry family members are living in your home and how much dust is collected. A typical air filter should last for about two weeks to a month in the cooling season.

Condensate Drain Line

If your condensation drain line becomes clogged by mold, algae or bugs, the water collected on the evaporator coil will not be able to flush away. This can cause a flooded home, water damage and the growth of mold and mildew. The float switch in your indoor coil will shut off the system when it detects a blocked drain line.